December 07, 2004
Major To Do's
- Upper left flipper doesn't fire. I think there's a mechanical problem keeping the flipper from moving.
- Lower right flipper sticks up. Gotta rebuild all the flippers in fact.
- Clock: the 30 minute clock opto sensor has burned out. I replaced the optos years ago cause this happened before. The recommended solution then (which I implemented) was to replace the optos, add diodes across the GI bulbs and drill small holes in the clock housing to let the heat escape. Soon I'll replace the boards with new optos and LEDs instead of incandescents.
Posted by spblat at December 7, 2004 07:33 PM
Boy was I wrong. See later posts on this. I had a bad flipper opto board, maybe two.